With the development of technology, in recent years, everyone’s devices for listening to songs have gradually transitioned from wired earphones to bluetooth earphones. By 2020, true wireless bluetooth earphones have become better and better. In addition to sound quality and more powerful functions, even Noise reduction can achieve a very powerful level. Except for audiophiles, few people insist on going out with wired earphones.
After all, the entry-level TWS has achieved a very cheap price. The TWS earphones that everyone chooses the most at around $50 are well balanced in terms of sound quality, quality, and battery life; if the budget is a little higher, you can buy noise-cancelling TWS earphones produced by major brands, and you can consider AirPods Pro if you increase your budget. Sennheiser, Bose, Sony and other big brands.
Today I brought you an entry-level earphones. It is the Audio-technica ATH-CK350iS earphones from Japan.
Transparent packaging, you can see the shape of the earphones. In addition to the brand logo and model number, a microphone has also become the focus of the introduction.
There is an anti-counterfeiting mark on the back of the package, as well as the six major features of this earphones, specifically: a 10mm drive unit to ensure better sound quality; the wire is grooved and flat, which can achieve anti-winding effect; 4 eartips of different sizes Optional; gift winder; with heavy bass guide hole; equipped with microphone.
The specific parameters of the product are on the side of the package, with a sensitivity of 102dB/mW, a frequency response of 20-23000Hz, an impedance of 24 ohms, a wire length of 1.2 meters (I actually measured 1.3 meters), and there is a paragraph in English at the bottom Mark, users who are allergic to metals should not use it.
After unpacking, it contains the instruction manual, earphones, three pairs of eartips, and cable winding clip.
Let’s take a look at the details of the earphones. The audio-technica logo is on the outside of the earphones.
The inside of the earphones has the logo of the left and right earphones, and the product model. In the anti-bending area, there is also the L logo, and there is a small protruding dot on the left ear. When wearing the earphone blindly, such as listening to a song late at night, you can distinguish the left and right ears by touching this position. However, the right earphone has a microphone. Isn’t it easier to identify the microphone on the wire?
The caliber of the earphone’s sound cavity tube is slightly larger than that of the earphones on hand. According to the official description, it can provide better bass performance. In addition, the front end of the eartips of this earphones is a bit pointed, and it feels very comfortable for individuals to wear, and the feeling of ears bulging after long-term wear is much less.
The microphone position is not equipped with three buttons like other earphones, but a single button that can realize multiple functions.
The included cord clip can be used as earphone storage.
The earphone has a 3.5mm elbow interface, and there is a model sticker on the wire.
Many mobile phones nowadays do not have a 3.5mm interface. In the iPhone 8 years ago, there was an adapter in the mobile phone box. Now the iPhone does not even include a charging head.
Fortunately, there is a 3.5mm interface on the backup machine.
This earphones gives me the feeling that the bass performance is not bad, not very stuffy, but it is not very amazing; the high-pitched part is not harsh, unlike some earphones, the voice is very sharp when the volume is slightly louder. In addition, the details are also pretty good.
The shape of this in-ear earphone and the design of eartips are ergonomic, at least I feel very comfortable to wear, and it won’t distend my ears even if I wear it for a long time. There are also flat wires with grooves that are not easy to wind.
I remember that the previous wired earphones were not universal due to different standards? However, this ATH-CK350iS can be used normally on Android phones, Apple phones, and computers. It should be compatible with the design.
