In June 2024, Beats launched a new TWS earbuds – Beats Solo Buds. It uses Beats’ smallest charging case ever, equipped with a fully customized acoustic architecture, compatible with iOS and Android systems, and has a single battery life of up to 18 hours.
Beats Solo Buds is equipped with a customized sound system and a double-layer driver unit design to minimize micro-distortion. By placing it in parallel with the acoustic nozzle filter, it can better transmit sound to the ear canal. The laser-cut ventilation holes further improve the audio performance. It adopts a clear and balanced tuning style to present a wide sound range and delicate music details.
Equipped with the custom-designed microphone and advanced noise learning algorithm, it provides clear call quality. Compatible with iOS and Android systems, it supports one-click pairing when used with Apple phones, tablets, and laptops, and automatically pre-pairs across devices. Android devices can control various functions through the Beats App.
We have previously disassembled Apple products including: Beats Fit Pro, Beats Studio Buds, AirPods Pro 2, AirPods Pro, AirPods 3, AirPods 2, Apple AirPods, AirPods Max, HomePod Mini, etc. Let’s take a look at the detailed teardown report of Beats Solo Buds.
01/ Beats Solo Buds Charging Case Teardown
Pry open the charging case and take out the charging bin. There is an FPC inside the cavity to connect all components. The Type-C charging port is fixed with screws.
Remove the screws and remove the Type-C port.
Remove all components at the bottom of the charging bin. There are three magnets at the bottom of the charging bin to fix the earbuds and the charging case lid.
FPC circuit.
Metal connector for charging the earbuds.
Micro switch for detecting the open and closed state of the lid.
IC with silkscreen LG.
Circuit of components on FPC.
IC with silkscreen 39A10CI.
IC with silkscreen 68ses.
02/ Beats Solo Buds Earphones Teardown
Disassemble the earbud cavity, and the battery is fixed inside the front cavity.
The motherboard unit is set inside the back cavity, and the FPC is connected through the BTB connector.
Pick up the connector and separate the cavity.
Separate the battery. The speaker structure at the bottom of the front cavity, the FPC connects the charging contacts.
Take out the FPC and components inside the front cavity.
The FPC circuit of earbud.
The front of the earbud speaker is protected by a metal cover. According to the official introduction, a double-layer drive unit design is adopted to minimize micro-distortion.
On the back of the speaker, a tuning hole is set in the middle and protected by a silk screen.
After actual measurement, the speaker diameter is about 8.15mm.
The earbud has a built-in steel shell button battery with a rated capacity of 105mAh 0.403Wh.
Metal connector connected to charging case.
BTB connector connected to motherboard.
The circuit on FPC motherboard.
IC with screen printing 9L6.
Two ICs with screen printing B2L EV.
Lithium battery protection IC with screen printing 3K8.
Amplifier with screen printing +AFZ KAM.
Remove the back cover of the headset. The inner structure of the cover: key cap structure on the top, and tuning cotton protection filled on the bottom.
The structure below the cover, with bluetooth antenna and function key board.
Take out the motherboard inside the cavity. The bottom structure of the back cavity – the function key board is connected to the motherboard through the metal dome.
The circuit on one side of the earbud motherboard.
The circuit on the other side of the earbud motherboard.
MEMS microphone with laser engraved QR code, used for voice call function pickup.
BTB connector connected to FPC, the right side was damaged during disassembly.
MediaTek MT2827SA bluetooth audio SoC – Apple customized.
26.000MHz crystal oscillator, providing clock for bluetooth chip.
IC with silkscreen 1FJ 4HC.
An unmarked IC.
An IC with +7048 printed on the right and 3441 printed on the left.
All components of Beats Solo Buds true wireless earbuds.
03/ Summary
Beats Solo Buds adopts a very light and compact charging case design, which brings extreme portability. The translucent shell makes the look more trendy and fashionable. The earbuds continue the family-style bean-shaped design, and the body curve ensures comfortable wearing.
The charging case does not have a built-in lithium battery and is only equivalent to a charging stand, which needs to be connected to a power source to charge the earbuds. The earbuds are equipped with a 105mAh steel shell button battery, which provides 18 hours of battery life. Other configurations are mostly customized models, including a customized double-layer driver unit, MediaTek MT2827SA bluetooth audio SoC, and a MEMS microphone for sound pickup.
PS: Translated from 52audio
Check Apple Beats Solo Buds price:
- Check latest price on Amazon Germany
