Summer is here, and the heat dissipation of mobile phones has become a headache for everyone. With the help of the heat dissipation back clip, the mobile phone can reduce the temperature of the mobile phone in game scenarios such as high load, thereby improving the gaming experience. This time I will experience the FunCooler 3 Pro mobile phone cooler just released by Black Shark.
The Black Shark FunCooler 3 Pro is composed of two colors, black and dark blue, and the appearance is not much changed from the previous Black Shark FunCooler 2 Pro ($36). However, the Kevlar carved pattern design is added to the outer ring of the back clip, which increases the visual perception of athletics. Equipped with a purple power switch key and added RGB cool lighting, you can choose different lighting effect modes through the Black Shark APP.
However, the air duct design of the Black Shark FunCooler 3 Pro has been redesigned, turning the original cooling column solution into a sheet-like air duct design. The advantage is that the heat dissipation area is increased, and the upper and lower air outlets are ensured, which improves the heat dissipation effect and avoids the situation of hot air blowing hands.
Moreover, the Black Shark FunCooler 3 Pro adopts a cold and heat separation structure, which separates cooling and heat dissipation. The fan area is used for heat dissipation, and the cooling wafer area is used for cooling. And the area of the heat dissipation area has also been upgraded to 1404mm², and a 2200mm² high thermal conductivity copper thermal conductive version has been added. The maximum temperature drop can reach 30°C, and the minimum temperature in refrigeration can reach 0°C. And using a 20W super power input, the heat dissipation effect is relatively improved.
The Black Shark FunCooler 3 Pro uses a stepped gripper design, pulling the grippers on both sides to install with different mobile phones. Moreover, the design of the stepped gripper avoids pressing the side buttons or accidentally touching the buttons as much as possible, and is suitable for mobile phones with a width of 67mm-88mm. All mainstream mobile phones can be adapted, including Apple iPhone 13 mobile phones.
Measured 20 rounds of 3D Mark stress test of iPhone 13, the highest temperature of the screen is 37.3 ℃, and the highest temperature of the back is 38.8 ℃. After installing the Black Shark FunCooler 3 Pro, the maximum temperature of the screen is only 23.4℃, and the maximum temperature of the back of the fuselage is only 26℃. Moreover, the test data is also more stable, with higher scores, and the stability has increased from 70.8% at the beginning to 85.3%.
Cell phone cooler not installed
Install cell phone cooler
Black Shark FunCooler 3 Pro can be used with mobile phones, which can have a good heat dissipation effect. When playing with mobile phones in summer, you can give full play to the performance of the mobile phone, and at the same time avoid the situation that the temperature of the mobile phone is too high. If you are troubled by mobile phone fever, you can consider the newly launched FunCooler 3 Pro cell phone cooler from Black Shark.
Check Black Shark FunCooler 3 Pro price:
- Check latest price on AliExpress
Check Black Shark FunCooler 2 Pro price:
- Check latest price on AliExpress
- Check latest price on Amazon US
- Check latest price on Amazon UK
- Check latest price on Amazon Germany
- Check latest price on other Amazon countries
